Lightning Rodder banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I picked up a 2000 L back in may this year. The truck had an oem reciever that the previous owner removed prior to my buying the truck. I picked up a reciever at a local pull a part. I bought the dual plug, 4pin blade, and round rv plug from Oreilly. It plugs directly into the harness on the truck. Upon inspecting the fuse block under the hood. There were no charge relays or fuses. I added them and still no power at my plug.

Is there a diagram or flow chart I can follow to diagnose my problem? Been doing some reading and seems guys have just installed the relays and or fuses.

Thanks in adance!
 

·
SVT Poster
Joined
·
89 Posts
There is a ten amp fuse in the engine bay almost to the very front and left of the block. What is the charge relay/fuse you are talking about? I don't have my diagram on me right now. You check the fuses for ohm or continuity? And relays you can check with 12v power supply, battery or put a finger on it to see I it clicks...

Nothing works? no turn signals no nothing? Possibly chck the cale thru its routing to see if anthing is amiss???
 
1 - 2 of 2 Posts
Top