Lightning Rodder banner
1 - 20 of 26 Posts

·
Premium Member
Joined
·
13,857 Posts
Discussion Starter · #1 ·
BY South Florida Pulley Headquarters










(please don't remind me @ the Rusted Bolt + Washer, Terry just called
from Florida and yelled at me, YIKES
) and I aint kidding.....
IT'LL BE TAKEN CARE OF IT IN THE MORNING WHEN IT'S LIGHT OUT AGAIN

Now the amazing thing about this last picture is
The Truck is running (you can see the 8 MSD Lights lit)
and aint that some schitt, I caught that New Gatorback Belt in the perfect
frozen shot and position JUST FOR YOU TERRY :D



Ok
First I have to once again say WHAT a pleasure it is to deal with Terry
and SFPH.
Shipped it out Tues, I get it Thursday
Freight ALWAYS included in his pricing
The Quality (AS YOU CAN SEE) is outright AMAZING
Those 100MM Idler Pulleys (along with his Non Slip Uppers)
ARE DEF THE CORRECT WAY TO GET EVERY IOTA OF BOOST
AND NO SLIPPAGE
(or any weird bends or brackets needed)

Hats off to Terry and SFPH for "MORE" amazing Pulleys I now own from them.
AS USUAL TERRY, YOUR CUSTOMER SERVICE, QUALITY OF PARTS,
AND RESULTS ARE SECOND TO NONE, WOO HOO............
THANK YOU PAL
(I'll be thanking you more after the 1320 this weekend)
 

·
Registered
Joined
·
159 Posts
Rob, glad you got the combo installed, as now all we need is some nice 11.50 ET passes this weekend. BTW, do not forget to paint that Rusty Nut..... :D Good luck Saturday, cannot wait for the timeslips to be uploaded on Sunday. Thanks for participating in my own way to "Eliminate Belt Slippage" on these Lightning's!! :smt023
 

·
Registered
Joined
·
159 Posts
Yes a Big difference, especially on my Lightning and now Rob's :smt023
 

·
Registered
Joined
·
159 Posts
Your truck stock, you are good to go with what you already have. Anytime you change the Upper SC and Lower Crank Pulleys, then I would strongly consider changing both your upper 90mm Idler Pulleys out for Two - 100mm to give you much better belt wrap and eliminate any and all belt slippage that could be present , running 15 lbs. boost at least, at wide open throttle.
 

·
Registered
Joined
·
159 Posts
THese will be uploaded onto the website in the Lightning/Harley sections this weekend. The price for the pair of Billet 100mm Idlers will be $149.95 shipped. You can also find them in the Cobra section, but are listed separately, but the cost for two would still be the same. They have the new NTN Racing Bearings installed in them. Hope this helps, as here is a link to them in the Cobra section, look for them at the bottom of the page:

Billet Aluminum
100mm Idler Pulley $74.95 shipped - each!

http://www.southfloridapulleyhq.com/SFPH/cobra/ps_alum_idler_pulley_assembly.htm
 

·
Registered
Joined
·
159 Posts
RhinoHD, with other manufacturers Non-Slip Pulleys, that might be true, but certainly not with our DUB (Dial_Ur_Boost) Non-Slip Pulley Unit. We introduced these over a year ago and have not had one single problem with belts shredding etc. I am the guy who not only Invented the World's first Modular Interchangeable Supercharger Pulley Unit, but I also Created the First non-Slip Interchangeable Pulley Unit as well.

All other Interchangeble Pulley Units you see out here are "Imitations or Copies" of my DUB. These guy's Do Not know how to Invent something on their own, they only know how to Copy someone else's and tell others theirs is the best.......NOT!!!!

I have the same DUB Non-Slip Pulley unit installed on my 12 second Pontiac Grand Prix GTP, pulling 14 lbs. boost on the street , as well as our 12 second Red SVT Lightning , producing 15 lbs. of boost on the street and no problems. Both of our vehicles have had these Units installed using Goodyear Gatorback Belts, for close to a year now. Hope this helps.
 

·
Registered
Joined
·
568 Posts
ahhh that explains it.

I was wondering why all the posts about this south pulley company. I see they are a supporting vendor and I'm guessing you got a helluva price or free...

Kinda takes away from the credibility of all your posts Rob. SOrry to bust your chops, however if you are going to post something, include all the facts.
 

·
Premium Member
Joined
·
13,857 Posts
Discussion Starter · #13 ·
Wikdsvt said:
ahhh that explains it.

I was wondering why all the posts about this south pulley company. I see they are a supporting vendor and I'm guessing you got a helluva price or free...

Kinda takes away from the credibility of all your posts Rob. SOrry to bust your chops, however if you are going to post something, include all the facts.
Lets get something VERY STRAIGHT HERE
#1 SFPH became a Vendor LAST WEEK, and I have been BOASTING
about Terry's Company and SERVICE since 2002 when I bought
his Dial-Ur-Boost Upper Pulley and Gatorback Belt. I also bought his ASP Puller Tool to do the install. A few weeks later I bought his T6 Aluminum Lower Crank Pulley and yet another longer Gatorback Belt. And a few weeks after that, I bought yet another Upper Quick Change Pulley that has allowed me to switch back and fourth from 4 to 6+ lbs of pulley OVER THE YEARS and have great tuning and tweaking ability.

Oh look heres a post from the Summer of 02 on F-150

08-24-2002 12:57 PM

Rob_02Lightning said:
Hi All,

I know we're only allowed to talk good things about the SUPPORTING VENDORS, but I believe credit should be giving when credit is due. With that said, last night I Installed my new South Florida Pulley Headquarters’ 4 LB T6 Aluminum Lower Crank Pulley. If you remember, 2 weeks ago I installed their Dial-Ur-Boost Upper System. I find the quality and service of South Florida Pulley unbeatable.....................
I won't bore you with the whole Post, BUT YOU GET THE IDEA
Terry's been around LONGER THAN ANY OF THE BIG LIGHTING VENDORS,
I'm sure if you search you'll see a simular one earlier that summer, when I put the Upper on. and BTW, didn't even know Terry's name at the time,
BUT I DID KNOW HIS PRODUCTS AND CUSTOMER SERVICE WAS AMAZING

Oh here's another from 03
11-27-2003 10:21 AM

Someone asked
tlfwatch said:
Anyone ever deal with south florida pulley i just bought goodyear gator back belt #4080685 cost $40.00 includes shipping a friend told me they were quick shippers> I ordered it tuesday $40.00 for belt including does not seem to bad of price anyone bought from them before they seem to have a decent pulley the dub?? i have been reading about??:confused:
I replied

Rob_02Lightning said:
Terry R. (Owner) is an AWESOME guy

All my Pulleys are from SFPH, I also have Terry's Quik Change
Dial-Ur-Boost Upper Hub along with a Stock Size Upper and also the 2lb Upper.
I also have Terry's T6 Aluminum Lower Crank Pulley (4lb's)
I also bought the Pulley Puller Tool from Terry and I have spoken to him on many ocassions on the Phone, and also via E-Mail,
He's a great guy with massive knowledge on S/C Vehicles.
He's been in the S/C business a long time, he MAKES his own Pulleys for SFPH, and also for some of our Vendors.
He has ALWAY been a specialist in Supercharged Vehicles,
thats his expertise.

BTW
He also offers ALL THE OTHER MODS for a SC Vehicle.
Chips (Custom Tuning), Air Filter Systems, Suspension, Fuel, Exhuast, Etc...
I've order from him on many differant ocassions and have ALWAYS recieved what I ordered in two or three days.

Unfortunatly he's not a Supporting Vendor here :(
but he is an Awesome Company to deal with, and they do have
only top quality products "along with excellent customer service"

Hey if that sounded like a Commercial, it should,
Terry's a Great Guy, and SFPH is a Great Company :thumbsup:
I think it was right about this time I WAS ASKED BY F-150 TO NOT PUSH
NON VENDORS IN MY POST ANYMORE

It's a shame no one else thinks about buying their Pulleys,
FROM A PULLEY COMPANY..............

Oh and BTW
#2
I PAY FOR MY PARTS JUST LIKE EVERYONE ELSE DOES
With my CC's :D

Maybe for now on in, if I talk about him, I should remind everyone
we've been doing business for almost 3 yrs now, AND I DONT KNOW
1 OTHER LIGHTNING VENDOR WITH HIS CUSTOMER SERVICE
OR QUALITY OF PARTS.

Come on Wikdsvt, you should know me better than this if you've seen
me around all these years. HELL YA I WELCOME DENNY AND TERRY as Vendors here, AND HELL YA I SUPPORT THEM, (their the Best in the Business, BOTH OF THEM) The best part about it is, I WAS RUNNING
BOTH THEIR PARTS LONG BEFORE Lightning Rodder . Com ......

COME ON,
NOW TAKE IT BACK :D
 
G

·
Wikdsvt said:
ahhh that explains it.

I was wondering why all the posts about this south pulley company. I see they are a supporting vendor and I'm guessing you got a helluva price or free...

Kinda takes away from the credibility of all your posts Rob. SOrry to bust your chops, however if you are going to post something, include all the facts.
:smt105
 

·
Registered
Joined
·
261 Posts
I doubt any of you would risk performance or a motor for a discount or even a few hundred dollars of FREE parts . If something is good then it's good. Rob is very genuine from what I know and his results speak for themself.
 

·
Registered
Joined
·
9,791 Posts
 

·
Registered
Joined
·
17,565 Posts
they were of the SFPH no slip SNout pulley for 8 rib belts..
 
1 - 20 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top