Lightning Rodder banner
1 - 6 of 6 Posts

·
paranoid
Joined
·
4,608 Posts
Discussion Starter · #1 ·
i have a 5# lowerpulley and a 2.8 upper pulley on my L. and i was wondering if i should go ahead and get the 100mm idler pulley tensioner... i see that i idler pulleys now are getting shiner by the day (the stock ones on my truck).. so what do you guys think. jlp has them for 180 but i have not seen them and rem has them for 199 and they are billet it looks like a good setup (quality and looks)


the kid
jimmy
 

·
Registered
Joined
·
426 Posts
Check out SFPH selection.

I do want to note something though:
Any increase in belt wrap really ought to come from the passenger side of the blower pulley as 99% of the tension is on the drivers side.

Rich
 

·
Registered
Joined
·
202 Posts
I agree, every centrifugal system is tensioned on that side also, not the pulling side.

Jody
 

·
Registered
Joined
·
348 Posts
i just finished installing my aux ideler that i got from metco. i think i am going to get the pulley for the pass side too.
 

·
Premium Member
Joined
·
13,857 Posts
I've used Terry's 100mm Idlers on the orig Motor and LOVED THEM :smt023
Now I use a Magnum Powers Bracket and dont use one of the lower Pulleys,
it works out PERFECT  ;) 22 lbs of virgin screaming Boost and NO SLIPPING  :smt026
 
1 - 6 of 6 Posts
Top