Lightning Rodder banner
1 - 20 of 36 Posts

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #1 · (Edited)
I'm pulling stuff off of the truck in preparation of going to a DOHC turbo setup, so most, if not all, supercharger related parts are being sold.

Located in Marietta, Ga (30 mins north of Atlanta)
Prices do NOT include shipping unless stated.


3.375" OEM Whipple Supercharger Pulley - $60 Shipped
3.2" JDM Whipple Supercharger Pulley - SOLD
3.0" JDM Whipple Supercharger Pulley (Ding on lip, holes slightly egg-shaped) - $45 Shipped - PRICE DROP
2.75" JDM Whipple Supercharger Pulley - SOLD
Whipple Pulley spacer - $5 or Free if requested with purchase of pulley
Wheel Alloy wheel Rim Auto part Automotive wheel system
Red Button Fashion accessory Pattern Rim
Alloy wheel Wheel Auto part Rim Spoke

LFP 4# Lower Pulley Ring - $70 Shipped - PRICE DROP
Rim Wheel Alloy wheel Auto part Automotive wheel system

90mm Idler (Left) - $40 Shipped - PRICE DROP
90mm Idler (Right - Seized bearing, dings on lip) - $20 Shipped - PRICE DROP
Wheel Rim Alloy wheel Auto part Automotive wheel system

69.4" Napa Supercharger Belt (Used with 8lb lower, 100 Metco Idler, 3.375" or 3.2" Upper, SNUG fit) - $30 Shipped
68.0" Napa Supercharger Belt (Used with 8lb lower, 100 Metco Idler, 3.0" Upper, SNUG fit) - $30 Shipped
67.0" Napa Supercharger Belt (Used with 8lb lower, 100 Metco Idler, 2.75" Upper, SNUG fit) - $30Shipped
Text Font Textile Quilt Magenta
Synthetic rubber Tire Auto part Heat-shrink tubing



SOLD Items:
Accufab Polished Throttle Body (without TPS) - SOLD
Auto part Muffler Door handle Metal
Auto part

HitmanFab 4.5" Whipple Intake Tube w/ S&B Filter & all Hardware. Tube is coated with a ceramic coating called CermaKrome. - SOLD
Auto part Automotive exhaust Muffler Pipe Exhaust system
Auto part Automotive exhaust Muffler
Trick Composite I/C Tank - SOLD

Motoblue 8# (9.75") Lower Pulley and Hub with ALL Stainless Hardware - SOLD
Rim Alloy wheel Wheel Auto part Automotive wheel system
Metco 100mm Aux Idler Bracket - SOLD
Food Cranberry Dessert Cuisine Tableware
 

·
Registered
Joined
·
616 Posts
I'll take intake and 2.75 pulley
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #6 ·
Responding to PMs now.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #7 ·
2.75" Whipple pulley and spacer SOLD.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #8 ·
Metco Aux Idler SOLD
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #9 ·
All PMs replied to.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #13 ·
Buyer of intake should be sending payment today. Waitlist is about 4 deep right now, lol
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #14 ·
Hitman intake SOLD.
 

·
Mr. Crossfire
Joined
·
16,162 Posts
Should just buy my truck an sell the TH400 an get a A-1 trans and go 200 mph lol. GL with the turbo build.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #16 ·
Trick tank SOLD.

Should just buy my truck an sell the TH400 an get a A-1 trans and go 200 mph lol. GL with the turbo build.
Definitely a well done purpose built truck! I'm spying all of George's and Paul's threads for ideas.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #18 ·
I'd like to check out the build one day! I'm located over in hiram,ga right down the road lol
Absolutely! Not too far through things yet. Probably about 6-7 months until things start moving along with the fabricator.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #19 ·
Throttle body SOLD.
 

·
Premium Member
Joined
·
4,924 Posts
Discussion Starter · #20 ·
Lower 8# lower pulley and hub SOLD
 
1 - 20 of 36 Posts
Top