Lightning Rodder banner
1 - 4 of 4 Posts

·
2.9 Whipple E85R A1 Transmission
Joined
·
12,619 Posts
The FC2 needs to be installed in a dry location.., ie inside the cab.
Use the old 12v wire from the pumps as FC signal.
The old pump ground works as a controller ground.
Run a new ground wire from the pumps to the frame.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top