[jking34167]

well i was on a four hour drive today and my truck was making a weird noise and i felt like it was coming SC.well i stepped on it and all of a sudden the trucked bugged out.. 15 minutes into the drive the check engine light turns on. finished my tripped i pulled into autozone to get the code out. it threw out P114

can anyone give me some input. I know its a sensor but can it be something else throwing it off? am i able to still drive around like this as long is not long distances

 

[Killer Ride]

Well first check your intercooler pump make sure it is flowing then IAT2 connections.:bigtu

 

[ty.thompson1981]

http://engine-codes.com/p1114_ford.html Check that out. May point u in the right direction

 

[jking34167]

I check my resvior and it was empty. So I filled it with antifreeze and no bubbles.

Now if I pull off my pump to clean and after that if it doesn't work where can I order one from?

 

[corndog]

EBAY has em..

 

[jking34167]

You think the stealership has them as well?

 

[Thegoon]

Be prepared to be bent over at the dealership! Found this one on Amazon,

There is also a, "how to" on how to rebuild the original pump in the gen 2 section.

 

[Thegoon]

This one....


http://www.lightningrodder.com/forum/showthread.php?t=37089

 

[jking34167]

Thanks the goon I guess I'll have to buy a new one and fix the old one on the side since it's my DVD I'll check out after work see what happens

 

[jking34167]

Thanks the goon I guess I'll have to buy a new one and fix the old one on the side since it's my DVD I'll check out after work see what happens

 

[Throttle Jockey]

In addition to the faulty pump you might want to determine why you had no coolant in the reservoir, it seems to me that you have a two-part problem.

The ten row IC cores weren't prone to leaking like the nine row cores used in the early model Lightnings did. Leaks elsewhere in the system aren't too common either. Did you replace any of the IC lines by chance? Some guys replace the factory hardlines with 3/4" heater hose but this can cause leaks on the ports coming off the IC core behind the SC.

 

[jking34167]

yea i need to check where that coolent went anyideas were i should check for that? im going to check the oil first see if any signs of water in there. I added coolant but its not pumping at all.

 

[jking34167]

ill be doing this after dinner hopefully this will help for now

http://www.lightningrodder.com/forum/showthread.php?t=4191

 

[jking34167]

pump has been cleaned and its working properly. should the check engine light turn off by it self? also, no antifreeze inside the engine. anywhere else i should check?

 

[jking34167]

Here's the residue that came out and the pump started working

 

[04StruckDaGround]

That's alot of carbon dust I bet your brushes are gone. Replace the pump its not too expensive or rebuild it there's a thread on how to do that for like ten bucks max.

 

[jking34167]

yea it started working. dont get me wrong im buying one soon and replacing it with the newone, once the old one is out i will rebuild it that way i can have a spare

 

[jking34167]

check engine turned off so im guessing everything is back to normal.