BLUBOLT

Boss Hoss · Dec 3, 2020

Truck is # 3348 of 3781 built on 05/03/2004
Mods and maintenance: Just a list of what has been done and some parts still to go on....

Jokerz ported blower painted sonic blue

Jokerz ported C&L plenum painted sonic blue

Magnum Powers Big-O throttle body (Cerakoted black)

JDM phenolic plenum spacer painted sonic blue

K&N CAI hydro-dipped carbon fiber

BA2600 MAF painted silver mica
XCal3 tuned by “DOLSVT”
Last Dyno pull by Charleston Performance Solutions in 2015 was 420/488 (Humidity 48.3 Air Temp 77.4 Pressure 30.3 Pulls were done before installing Magnum Powers Big-O throttle body, AFCO heat exchanger, LFP Big Mouth intercooler tank)

LFP Big Mouth intercooler tank powder coated gloss black

EGR Delete

AFCO Heat exchanger

Dynatech headers

Dynatech catless mids

Bassani catback BX series

Baro plate from JCC

MMCustoms Eaton stainless bolts

ARP bolts for supercharger to lower intake

JLP engine coolant overflow tank powder coated gloss black

JCCustoms anodized blue EGR delete plate
JCCustoms ½” anodized blue “turkey pan” spacer (not installed)

Plugs changed every 5k miles with BR7EFs
New Denso coil packs

Fuel filter also changed every 5k miles

Engine oil and filter changed every 5k miles

Goodyear Gatorback supercharger belt

Billetflow 100mm idler pullies

6# lower pulley

Metco bearing caps for idler pullies

Metco idler bracket w/ 100mm pulley

Silicone Intakes silicone couplers with Tband clamps

Mad Enterprises Coil Pack Screws

Flushed engine and intercooler coolant at 92k miles

Team Breed valve covers (not installed)

Suspension:

Belltech 2" drop spindles, Belltech 2" drop hangers with JLP 2-3-4 shackles

Strange Engineering adjustable rear shocks
VAS Lightning rear mount shock bracket

Replaced upper and lower control arms at 92k miles with MOOG

Stiffler's traction bars

Replaced front sway bar bushings and end links @ 92k miles

Stock front coil springs with Bilstein shocks

Stock leaf springs

Replaced camber bolts @ 92k miles

Replaced tie rod adjusting sleeves at 72k miles

Replaced driver side outer tie rod end @ 72k miles

Replaced passenger side outer tie rod end @ 72k miles

Replaced drivers’ side inner tie rod end @72k miles

Replaced passenger side inner tie rod end @ 72k miles

Clunk washers

Brakes:

JCC hydro boost plate powder coated gloss black with remanufactured hydro boost brake booster and adjustable brake pedal rod (from “Lightning Aaron” Trimm)

Replaced rotors, bearings, seals, and calipers @ 92k miles

Flushed and bled brake system @ 92k miles

Rear brake pads replaced @ 72k miles

HD Circuitry line lock switch (not installed)

Replaced brake switch @ 92k

Interior:

JCC door sill plates w/ carbon fiber SVT inserts

12Fast4U center console with Old-timer’s Owner/build label

Autometer oil pressure gauge

Autometer boost pressure gauge

AEM wideband gauge

EBAY LED replacement bulbs

JCC billet door handles

Lloyd's plush floor mats (“SVT F-150” embroidered)

S/A-10 triple steering gauge pod

S/A-10 triple dash gauge pod (not installed)

JCC billet cup rings

Mesh cargo net behind seats

Carbon fiber hydro-dipped door handle cups

RAAM Mat inside cab and doors

Pumpkin brand Android radio

Body:

Solid rear window

Smoothed and painted rear window frame

Smoothed and painted third brake light

Smoothed and painted radiator shroud

painted billet hood props and stops

Smoothed and painted solenoid cover

Smoothed and painted fuse box cover

Smoothed and painted bed rail and tailgate caps

Smoothed and painted upper and lower OE grills

Smoothed and painted tailgate handle and lower tailgate trim

Smoothed and painted sidesteps
Smoothed and painted rear bumper pads

Smoothed and painted antenna base and cap

LED license plate lights

Depo headlights with LED lights

Depo clear corner lights with LED switch back bulbs

Depo clear taillights with LED reverse and brake bulbs

LED bulbs in cargo light for bed

Depo fog lights with LED bulbs

BEDRUG

ICT roll pan (not installed)

Truxedo LoPro tonneau cover

Painted wiper cowl

Stubby antenna

Painted bumper plug
Rear bumper has a chip and step pad has slight cracking in paint.

Front bumper gap delete
ARC Angel Fabrication body mount shims
WeatherTech window vents (not installed)

Street Scene smooth bed rail caps (not installed)

Transmission:

4X4 deep trans pan and filter

Motorcraft ATF fluid changed at 75k miles

Punisher valve body

Wheels:

SM0304 wheels with NITTO NT555G2’s 294/40/R20

NOS SVT center caps

BLUBOLT

General Information

Gallery

Comments

Boss Hoss

More in Showcase

More in Showcase