Two Eatons and lots of other parts! - Lightning Forum

lkatya · 03-20-2009, 12:40 AM

1) 01'-04' Eaton blower with 56k has typical rotor coating flaking off! Great to send off for porting! SOLD

2) 01'-04' Eaton SOLD

3) Stock plenum used $50

4) Carbon fiber CAI w/ used 12" filter and 90mm MAF $75SOLD

5) Stock fuel hat with twin focus pumps. Less than 1000 miles on the pumps. I made over 475hp with these on 100% stock fuel system $175

6) Stock fuel rails off 01' L $50

7) 42lb injector set of 8 $100SOLD

8) Stock IC resevior $ 20SOLD

9) 01' stock TB $ 50

Will post pics tomorrow!

lightning_2000 · 03-20-2009, 01:06 AM

interested in the number 1 item

eagle123 · 03-20-2009, 03:53 AM

I want the # 7 item (42# injectors). send me some contact info to gen3stang@aol.com please

Frost340 · 03-20-2009, 05:29 AM

interested in the intake, got pics?

Scarpino · 03-20-2009, 01:02 PM

Next in line for item #1

PM me pictures please.

lightning_2000 · 03-20-2009, 03:27 PM

paypal sent for item number 1 the stock eaton

1qwik331 · 03-21-2009, 07:36 AM

Still have injector's,send me p.m. if you do.Need them for fox body project we have.Got cash in hand or pay-pal.Thank's Billy

lkatya · 03-21-2009, 09:05 AM

Pics will go up today! I took pics of everything at my shop yesterday then left the SD card from my camera on my desk. But I'm going down this morning to ship off the used blower and grab my pictures!
Jason

lkatya · 03-21-2009, 04:40 PM

pics loaded!

Frost340 · 03-21-2009, 07:34 PM

Is the intake gone?

lkatya · 03-21-2009, 08:28 PM

Quote:

Originally Posted by Frost340

Is the intake gone?

Nope!

lkatya · 03-22-2009, 10:21 AM

ttt

02SlidewayzSVT · 03-23-2009, 06:39 AM

Hey man I'll take that CAI.. I left you a e-mail and a message on NLOC

lkatya · 03-23-2009, 07:36 AM

Quote:

Originally Posted by 02SlidewayzSVT

Hey man I'll take that CAI.. I left you a e-mail and a message on NLOC

I got it!

02SlidewayzSVT · 03-26-2009, 06:33 AM

Money order was sent out yesterday morning..

03-20-2009, 01:02 PM	#5
Scarpino BLACK SUNSHINE Join Date: Jan 2008 Posts: 812 Rep Power: 15584	Next in line for item #1 PM me pictures please. __________________ C&L Elbow, Steeda CAI, 2.75 Metco Upper, JLP 4lb Lower, Greg Evans FTVB, Stripped Rotors, Filled Silencer Holes, Boost-Bypass, Flowmasters, LFP Oil Sep, TR6 Plugs, 2" Shackles, 2 Leafs Removed, Front Sway-Bar Removed, Lakewood T-Bars, Canton Res. Tank, Battery relocation, Competition Engineering Driveshaft Safety Loop, and a few Auto-Meter gauges Production #56 of 4,270 (produced) Production #56 of 1,036 (in Black)

03-21-2009, 09:05 AM	#8
lkatya KB 2.6 Equipped SRT EATER Join Date: Dec 2008 Location: Los Angeles Posts: 2,270 Rep Power: 71582877	Pics will go up today! I took pics of everything at my shop yesterday then left the SD card from my camera on my desk. But I'm going down this morning to ship off the used blower and grab my pictures! Jason __________________ *Stage 2 motor Built by Scott "The Hawk" Hesselgrave.....KB2.6.....JLP Powerflow Plenum.....JLPCR exhaust.....Circle-D stage 2 trans.....and all supporting modsTEAM SWANSON***

03-21-2009, 04:40 PM	#9
lkatya KB 2.6 Equipped SRT EATER Join Date: Dec 2008 Location: Los Angeles Posts: 2,270 Rep Power: 71582877	pics loaded! __________________ *Stage 2 motor Built by Scott "The Hawk" Hesselgrave.....KB2.6.....JLP Powerflow Plenum.....JLPCR exhaust.....Circle-D stage 2 trans.....and all supporting modsTEAM SWANSON***

03-22-2009, 10:21 AM	#12
lkatya KB 2.6 Equipped SRT EATER Join Date: Dec 2008 Location: Los Angeles Posts: 2,270 Rep Power: 71582877	ttt __________________ *Stage 2 motor Built by Scott "The Hawk" Hesselgrave.....KB2.6.....JLP Powerflow Plenum.....JLPCR exhaust.....Circle-D stage 2 trans.....and all supporting modsTEAM SWANSON*** Last edited by lkatya; 03-22-2009 at 10:33 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2009, 01:06 AM	#2
lightning_2000 Stroked & Blown! Join Date: May 2008 Location: Mcminnville, Tn Posts: 442 Rep Power: 37099901	interested in the number 1 item

03-20-2009, 03:53 AM	#3
eagle123 Senior Member Join Date: Sep 2008 Location: Brandon, Florida Posts: 117 Rep Power: 20	I want the # 7 item (42# injectors). send me some contact info to gen3stang@aol.com please

03-20-2009, 05:29 AM	#4
Frost340 Senior Member Join Date: Feb 2008 Location: Spring Hill, FL/ McDonough, GA Posts: 429 Rep Power: 6543830	interested in the intake, got pics?

03-20-2009, 03:27 PM	#6
lightning_2000 Stroked & Blown! Join Date: May 2008 Location: Mcminnville, Tn Posts: 442 Rep Power: 37099901	paypal sent for item number 1 the stock eaton

03-21-2009, 07:36 AM	#7
1qwik331 Senior Member Join Date: Oct 2008 Posts: 177 Rep Power: 25	Still have injector's,send me p.m. if you do.Need them for fox body project we have.Got cash in hand or pay-pal.Thank's Billy

03-21-2009, 07:34 PM	#10
Frost340 Senior Member Join Date: Feb 2008 Location: Spring Hill, FL/ McDonough, GA Posts: 429 Rep Power: 6543830	Is the intake gone?

03-23-2009, 06:39 AM	#13
02SlidewayzSVT Junior Member Join Date: Mar 2009 Posts: 3 Rep Power: 0	Hey man I'll take that CAI.. I left you a e-mail and a message on NLOC

03-26-2009, 06:33 AM	#15
02SlidewayzSVT Junior Member Join Date: Mar 2009 Posts: 3 Rep Power: 0	Money order was sent out yesterday morning..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)