Blown5Pnt4
02-11-2006, 06:37 PM
Well Im Posting this to gauge interest. I'm thinking of selling my project car. I'm just getting bored with it, and would like to invest some more money into my Lightning plus buy something better for DD duty so I can start to save for a house. Anyway heres the details.
1988 Notch Mustang
2.5" cowl hood
Flaming River Manual Rack Kit (Part Number 1890)
QA1 Tubular Kmember
Brand New Ford Motorsport A-Arms/balljoints
Koni Adj Struts
Maximum MotorSports Caster/Camber Plates
Brembo 13" front rotors
SN-95 Master Cylinder
SN-95 Cobra Calipers
99 Mustang GT Wheels
4cyl Front Springs
Eibach Drag Launch Rear Springs w/ Air Bag
Brand New 6 Piece Headlight Kit w/ Clear Corners (still in box)
Custom Thru the Floor Sub Frame Connectors
Custom 8point Roll Bar
Trunk mount Battery Kit
Power Master Hi Torque Mini Starter
FRPP Rear 5 Lug Conversion Kit w/ Drum Brakes
Section of trunk is already cut, for mounting of fuel cell
Also have some parts in the basement that will go with it, such as interior peices, set of shortie headers
Car is equipped with manual windows as well. I was planning on making this car as light as possible without making it a deathtrap. The car is very straight with minimal rust (mostly on welds of subframes). Car Needs Paint.
Car also was a 4cyl conversion and has no EFI Harness. Firewall dents, were done by a previous owner, in the process of getting a custom plate fabbed up to be welded over the damaged area. Plate will be included.
$3k neg obo
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch10.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch9.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch8.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch7.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch6.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch5.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch4.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch11.jpg
1988 Notch Mustang
2.5" cowl hood
Flaming River Manual Rack Kit (Part Number 1890)
QA1 Tubular Kmember
Brand New Ford Motorsport A-Arms/balljoints
Koni Adj Struts
Maximum MotorSports Caster/Camber Plates
Brembo 13" front rotors
SN-95 Master Cylinder
SN-95 Cobra Calipers
99 Mustang GT Wheels
4cyl Front Springs
Eibach Drag Launch Rear Springs w/ Air Bag
Brand New 6 Piece Headlight Kit w/ Clear Corners (still in box)
Custom Thru the Floor Sub Frame Connectors
Custom 8point Roll Bar
Trunk mount Battery Kit
Power Master Hi Torque Mini Starter
FRPP Rear 5 Lug Conversion Kit w/ Drum Brakes
Section of trunk is already cut, for mounting of fuel cell
Also have some parts in the basement that will go with it, such as interior peices, set of shortie headers
Car is equipped with manual windows as well. I was planning on making this car as light as possible without making it a deathtrap. The car is very straight with minimal rust (mostly on welds of subframes). Car Needs Paint.
Car also was a 4cyl conversion and has no EFI Harness. Firewall dents, were done by a previous owner, in the process of getting a custom plate fabbed up to be welded over the damaged area. Plate will be included.
$3k neg obo
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch10.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch9.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch8.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch7.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch6.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch5.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch4.jpg
http://img.photobucket.com/albums/v516/Blown5pnt4/Mustang%20Pics/TheNotch11.jpg